Timing for events of any size, any discipline, anywhere in Australia and New Zealand. Run it yourself with Barefoot Lite, or have our team deliver it with Barefoot RFID — both on the same system your entries came through.




















Events delivered every year across Australia and New Zealand
Participants supported at a single event
Combined event experience
Australian and New Zealand owned, operated and on the ground
Some of the best courses in Australia and New Zealand are the hardest ones to get a timing crew to. Flying people to a remote start line costs more than the timing itself, and you pay it again every edition.
Barefoot Lite is chip timing your own team can deploy. The units are light enough to carry to a checkpoint, run all day on internal batteries, and send live data back over the mobile network. You set them up where the course needs them — the start, the finish, mandatory checkpoints, any cut-off.
Tags are reusable, so there is no per-participant consumable to buy again next year and no bin full of single-use plastic at the finish.
Live tracking runs alongside it, so families, crews and your safety team can follow every athlete across the course.
This is RFID, not volunteers with stopwatches. The results are chip-timed. You are just the one who set it up, with our team on the phone if you need us.
When the field is big or the format is complicated, you want people on site whose only job that day is making the results right.
Barefoot RFID is our crewed timing service, proven at events of up to 50,000 participants on trusted European-engineered hardware. We handle setup, race day and results, and we pack down when you are done.
It is built for the formats that break simpler systems. Wave and interval starts. Triathlon transitions and multi-leg results. Laps, relays, split points along a course, and finishes where hundreds of people cross within a minute of each other.
Because registration and timing run on the same system, your entrant data is already there. Nothing gets re-keyed, so the errors that come from moving data between vendors do not get the chance to happen.
And there is one team accountable. If something needs fixing at 6am, you call people who have run events themselves, in your own time zone.
Registration and timing run on the same platform at Barefoot, so entry data flows straight through to results without anyone re-keying it. That matters because moving data between two vendors is where most race-day results errors start.
It also means one team is accountable. When something needs sorting on race morning, nobody is pointing at anyone else.
And you can keep entries open later, because a late entrant lands in timing automatically rather than needing a manual import the night before.
Multi-checkpoint timing on remote courses, without flying a crew in.
Waves, transitions and multi-leg results, with reusable ankle tags built for water.
Heats, stations and repeat rounds for Hyrox-style and obstacle formats.
Fun runs to marathons, from a few hundred entrants to a city start line.
Laps, stages and mass starts across road and off-road cycling.
Barefoot Lite uses reusable tags, which removes a per-participant consumable and the single-use waste that goes with it. Keep the claim to what is verifiable: reusable tags, reduced single-use waste. Do not claim carbon outcomes. Roughly 80 words.
Let's connect and see how Barefoot Sport simplifies registrations and maximises participant experience.
Lite suits remote, multi-checkpoint and smaller events you want to run yourself. RFID suits large fields and complex formats with our crew on site. Tell us your event and we will say which.
No. It is RFID with reusable tags and live tracking, deployed by your team rather than ours. The results are chip-timed, not hand-recorded.
No, but data flows cleanly when you do. Entries move straight into timing with no re-keying, and one team is accountable if something goes wrong.
Yes. Barefoot is owned and operated in both countries with people on the ground, and Barefoot Lite is built for places a crew cannot easily reach.
It depends on field size, timing points, tag type, format and travel. Send us your event details and next date and we will come back with a figure, not a range.
You call a local team who have run events themselves. Backup procedures are part of every deployment, because the event happens once.
Most providers quote rather than publish rates, but the cost is driven by five things: field size, the number of timing points, whether tags are disposable or reusable, crew and travel, and format complexity. Disposable tags are a recurring per-participant consumable — an Australian supplier lists multisport tags at around $1.20 each excluding GST — so a 1,000-entrant event carries roughly $1,200 in tags alone, every edition. For remote courses, crew travel and accommodation often exceed the timing itself.
Yes, and the sensible answer depends on which method you mean. Manual timing with volunteers and a timing app works for small fields but relies on human entry and struggles with dense finishes. Self-deployed RFID gives chip-timed results with the organiser setting up the equipment, which suits remote and multi-checkpoint courses. Building your own system from components is cheapest and demands the most technical understanding. Field size, finish density and how many split points you need should decide it.
Disposable tags are single-use, usually attached to or built into the race bib, and are bought again for every edition. Reusable tags are more robust, commonly worn on an ankle or wrist band, and are collected and used again — which is why water-based and multisport events favour them. Disposables cost less per unit and need no collection; reusables cost more upfront, remove the recurring consumable and cut single-use waste, but require a return process at the finish.
Place a timing point at each location where a passage needs to be recorded — usually the start, the finish, mandatory checkpoints and any cut-off. Modern units are light enough to carry in, run on internal batteries for a full race day, and send data over the mobile network where coverage exists. Timing confirms an athlete passed a fixed point; live GPS tracking shows movement between points. Remote events with safety cut-offs generally need both.
Not necessarily, though it has been the norm in Australia and New Zealand. Running both through one provider removes the re-keying step between systems, which is where most race-day results errors originate, and it means one team is accountable rather than two. It also lets you keep entries open later, because late entrants flow into timing without a manual import.
Work with people who get the pace, pressure, and precision of endurance events and build platforms that match it.